GENERAL INFORMATION
1.
A qualified electrician, in accordance with IEE wiring regulations, should carry out
connection to mains wiring.
2.
Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
3.
Cleaning of reflectors and lenses should be carried out using clean, soft and lint free
cloths and anti-static cleaning fluid.
4.
Do not carry out high voltage insulation test, i.e. 500/1000v this may damage internal
components.
5.
Electrically isolate this luminaire during maintenance.
6.
Replacing the light source within this luminaire shall only be carried out by the
manufacturer, service agent or a similar qualified person.
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England
Registered Office:
As above
PK-LEAF-TEGANSLIM
TECHNICAL SUPPORT
Tel: 0161 331 5700
e-mail:
www.whitecroftlighting.com
TEGAN SLIM 600SQ
RECESSED LED
LUMINAIRE
Installation Instructions
Jun 2018 - Rev04
SPECIFICATION
Dimensions
595 x 595 mm
Weight
4.2kg STD / 5.5kg EM/EP options
Finish
Body
RAL 9003
Materials
Body
Rigid 0.5 mm mild steel
Diffuser
Area - Tp(b) 1.5mm Acrylic diffuser material.
Tp(a) 3mm Polycarbonate diffuser material.
Office -2.5mm acrylic micro prism
Lamp Options
2 x LED boards.
Control Gear
Fixed Output electronic control gear.
Dali Dimming gear.
Ceilings
Lay-in T15 and T25 only.
Emergency options 3 hour maintained integral inverter
Integral COMEPS inverter (can be wired as Easy Test)
IP Rating
IP44
Supply
220V-240V 50/60Hz
Cable spec
1.5mm
2
Max
