English
UNITED KINGDOM •
customer service
tel:
020 8247 9300
internet:
www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver
. 20181113
Solar Light
Art.no 36-7561 Model TN-8069
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our
Customer Services.
Safety
• Handle the product with care, making sure not to damage
the surface of the solar cell and ensuring that it is not covered with
dust or affected by other contaminants.
• The product must not be changed or modified in any way.
• Do not let children play with the product.
Solar cell installation
In the ground
1. Set the switch on the back of the solar cell to
ON
.
2. Attach the ground spike to the solar cell and then push the spike
into the ground.
3. Angle the solar cell in such a way that it can receive as much
sunlight as possible.
On a structure
1. Detach the bracket from the solar cell.
2. Using the bracket as a guide, mark out the position of the mounting
holes on the wall or structure onto which the solar cell is to be fastened.
3. Use an appropriate type of screw or fastener for the material of
the structure.
Ensure that there are no electrical wires or water pipes
concealed below the surface into which you intend to drill/screw.
4. Set the switch on the back of the solar cell to
ON
.
5. Screw the solar cell back onto the bracket and adjust the angle of
the solar cell so it can receive as much sunlight as possible.
6. Place the light in the desired outdoor location.
7. The light comes on automatically at dusk (as long as the battery has
been charged).
The light can also be powered by
a battery pack (sold separately) to enable
it to be used all year round. For battery
pack operation, unscrew the connector
on the cable joining the solar cell to
the light and replace the solar cell with
a battery pack.
Care and maintenance
• The light and the solar cell can be cleaned by wiping them carefully
with a damp cloth. Use only mild cleaning agents, never solvents or
corrosive chemicals.
• Replacing the battery in the solar cell:
1. Remove the 4 screws on the back of the solar cell. Remove
the back cover.
2. Replace the battery (1 × 1.2 V, AA/HR6 800 mAh NiMH) making
sure that it is fitted with the correct polarity.
3. Refit the battery cover.
The battery must only be replaced with an equivalent
rechargeable battery.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste. This
applies throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed
in for recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
Specifications
Rechargeable battery
1 × 1.2 V, AA/HR6 800 mAh NiMH
Charging time
Approximately 8 hours (in continuous sunlight)
Operating time
Approximately 6 hours (when fully charged)
Height
45 cm
Secure the light to the ground using
the included metal pegs.
4. Place the solar
light in a suitable
outdoor location.
5. The light comes
on automatically
at dusk (as long
as the battery has
been charged).
