3.
13
3
2.
Blade Screw x 15
Hardware Used
AA
H
I
Lift canopy (B) to mounting bracket (C) and align
slotted holes in canopy (B) with canopy mounting
screws (K) loosened in Step 4a, page 6. Twist
canopy (B) clockwise to lock. Re-insert the two
canopy mounting screws (K) previously removed
(Step 4a, page 6), then tighten all securely.
1.
FINAL INSTALLATION
B
D
K
B
K
1
Downrod
Option
Closemount
Option
D
D
Align posts in blade arm (H) with holes on ridged
side of blade (G) and then push up on blade arm
(H) until posts go through the holes in blade (G).
Insert three blade screws (AA), along with three
rubber blade washers (CC), to attach blade arm
(H) to blade (G). Then, tighten each blade screw
(AA) starting with the one in the middle.
Repeat with remaining blades (G).
Rubber Blade
Washer
x 15
CC
H
CC
AA
G
2
Attach blade arms (H) to the bottom of motor
housing (D) with motor screws (I) previously
removed (Step 5, page 7). Tighten motor screws (I)
securely.
Note
: Make sure to completely secure each blade
arm (H) before proceeding to the next.
