background image

11

NOTE:

 This fan is remote control adaptable (remote control sold separately). Any remote control 

used with this fan MUST be UL-approved for DAMP LOCATIONS.

       

WARNING:

  To reduce the risk of fire, electrical shock or personal injury, wire connectors 

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from 
the fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect to 
the corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

       

CAUTION:

 Be sure outlet box is properly grounded and that a ground (green or bare) wire is present.

       WARNING:

 If house wires are different colors than referred to in the following steps, stop 

immediately. A professional electrician is recommended to determine wiring.

WIRING

Choose wiring diagram (Fig. 1a, Fig. 1b or Fig. 1c) that 
fits your situation and make appropriate wiring 
connections as follows: [

IMPORTANT:

 For each wire 

connection below, use one of the wire connectors (BB) 
provided, making sure to screw wire connector (BB) on 
in a clockwise direction.]

1a. 

FAN AND LIGHT CONTROLLED BY PULL 

CHAINS:

 Connect BLACK and BLUE wire from fan 

to BLACK wire from ceiling. Connect WHITE wire 
from fan to WHITE wire from ceiling. Connect all 
GROUND (GREEN) wires together from fan (on 
downrod (A) and mounting bracket (C)) to 
BARE/GREEN wire from ceiling.

 1. 

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

1a

FAN AND LIGHT CONTROLLED BY PULL CHAINS

120V POWER 
FROM CEILING

GREEN

WHITE

BLACK

BLUE

BLACK (POWER)

WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

1b. 

FAN CONTROLLED BY PULL CHAIN, LIGHT 

BY WALL SWITCH:

 If you intend to control the fan 

light with a separate wall switch, connect BLACK 
wire from fan to BLACK wire from ceiling. Connect 
BLUE wire from fan to the BLACK wire from the 
independent wall switch for the light. Connect 
WHITE wire from fan to WHITE wire from ceiling. 
Connect all GROUND (GREEN) wires together 
from fan (on downrod (A) and mounting bracket (C)) 
to BARE/GREEN wire from ceiling.

GREEN

WHITE

BLACK

BLUE

120V POWER 
FROM CEILING

BLACK (POWER)

BLACK (WALL SWITCH)

WHITE (NEUTRAL) 

GROUND/GREEN (BARE)

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH

1b

Summary of Contents for WCK52NWZ5D



















Reviews: