DOWNROD-STYLE FAN MOUNTING
9
5.
5
If you decided to cut back the lead wires in Step 4,
strip 1/2 in. of insulation from end of each wire --
white, black, green and blue (if applicable). Twist
stripped ends of each strand of wire within the
insulation with pliers (not included).
6. Install hanging ball of downrod (A) into opening of
mounting bracket (C). Align one of the slots in
hanging ball with tab in mounting bracket (C).
DANGER:
Failure to align one of the slots in
the ball with the tab may result in serious injury or
death.
Continue to
WIRING
on page 11.
C
A
6
Slot
Tab
Hanging
Ball
CLOSEMOUNT-STYLE FAN MOUNTING
Remove canopy cover from bottom of canopy (B).
NOTE
: It may be necessary to use the handle end of
a screwdriver (not included) to remove the canopy
cover by tapping on the canopy cover from the
inside
of the canopy (B).
NOTE
: Downrod (A), yoke cover (E) and canopy
cover are not used in this type of installation.
1.
1
Canopy
Cover
B
