I
J
Blue
Black
H
White
H
B
EE
13
10
11
ASSEMBLY INSTRUCTIONS
16. Loosen two preassembled screws from fitter plate (I).
Remove and save remaining preassembled screw.
17. Connect
BLUE
wire from fan motor assembly (H) to
BLACK
wire from light fixture (J). Connect
WHITE
wire from fan motor assembly (H) to
WHITE
wire from
light fixture (J).
ASSEMBLY INSTRUCTIONS
14. Pull the
BLUE
and
WHITE
wires from fan motor
assembly (H) through center hole of fitter plate (I).
Align two keyslots on fitter plate (I) with two screws
on black bracket below fan motor assembly (H).
13. Loosen two preassembled screws from fan motor
assembly (H). Remove and save remaining
preassembled screw.
16
17
14
H
Screw
(remove)
Screws
(loosen only)
Keyslots
Black
bracket
H
I
I
Screw
(remove)
Screws
(loosen only)
15. Place the fitter plate (I) over two screws and turn
clockwise until it locks. Install previously removed
screw (Step 13, page 10) and securely tighten all
screws.
15
I
Screw
12. Insert blade assembly through slot on fan motor
assembly (H) and align two screw holes in blade
arm (F) with screw holes in fan motor assembly (H).
Secure with two blade arm screws (BB). Repeat for
remaining blade assemblies.
H
B
EE
12
Hardware Used
BB
Blade Arm Screw x 10 + 1 extra
Slot
F
BB
H
