9
Lowes.com/harborbreeze
FLUSHMOUNT INSTRUCTIONS
3. Raise assembly and temporarily place one side of
canopy (C) onto hook of mounting bracket (A). This will
allow for hands-free wiring.
Proceed to
WIRING
below.
A
C
Hook
3
2. Remove the three preassembled Phillips head screws
near the coupling (K) on the motor housing (F). Save
them for future use. Guide motor wires through the base
of the canopy (C), then attach canopy (C) to motor
housing (F) with previously removed screws. Tighten
securely.
1. Remove canopy cover (D) by pressing out on the
inner edges of the canopy cover until it releases from
the canopy (C).
2
C
F
K
Screw
C
D
1
Note:
Flushmount installation will not use canopy cover (D),
downrod assembly (B), clevis pin (M), hairpin clip (N) or
coupling screws (O).
