FINAL INSTRUCITONS
3. Loosen (do not remove) the motor screws (S) from
motor housing (F) and discard the preassembled
motor blocks. Slide the blade assemblies onto motor
housing (F) and tighten the motor screws (S) securely.
Note:
If you misplace one or two motor screws during
installation of the blade assemblies, use the extra motor
screws (CC) instead.
Note:
Make sure to keep loose hardware separate to
avoid confusion during installation.
3
S
G
F
12
Lowes.com/harborbreeze
Motor Screw
5. Insert the wires from the motor housing (F) through the
middle hole in the switch housing (I). Attach the switch
housing (I) to the mounting plate on motor housing (F)
by placing the keyslot holes from the switch housing (I)
onto the two protruding mounting screw (Q) heads.
Adjust the switch housing (I) until the screw heads are
aligned with the keyholes, then re-insert mounting screw
(Q) previously removed (step 4, page 12). Tighten all
mounting screws (Q) securely.
4. Remove one of the mounting screws (Q) on mounting
plate of motor housing (F), then loosen the other two.
Q
4
Mounting
Plate
Q
I
Mounting
Plate
5
