WIRING
11
Lowes.com/harborbreeze
3
Gently slide remote control receiver (J) smooth side
up into mounting bracket (C). Turn spliced/taped
wires upward and gently push wires and wire
connectors (AA) into outlet box. Let antenna from
remote control receiver (J) hang to the side.
NOTE:
The remote control included with this fan
meets the following requirements:
a.
Not for use with solid state fans.
b.
Electrical rating: 120V / 60 Hz;
motor amps:1.5 MAX.
Should you choose to use a different remote control
with this fan, it must also meet these same
requirements
3.
Wrap electrical tape around each individual wire
connector (AA) down to the wire.
WARNING:
Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of
box from the black connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (AA) into outlet box.
2.
2
AA
AA
AA
Hardware Used
E3 Wire Connector
x4
AA
Antenna
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
4
1
2
3
IMPORTANT
: Using a full range dimmer (not
included) switch to control fan speed will cause a
loud humming noise from fan. To reduce the risk of
fire or electrical shock, do NOT use a full range
dimmer switch to control fan speed.
4.
A
J
C
