13
Lowes.com/harborbreeze
2. Restore electrical power. Within 30 seconds of
restoring electrical power, press the “ ” button
on the front of the remote control transmitter (I) for
5 seconds. Use the remote control to test the
oscillation and fan functions (see operating
instructions on page 14) to confirm the learning
process is complete.
IMPORTANT:
To prevent damage to remote
control transmitter (I), remove the battery (K) if not
used for long periods. Store the remote control
transmitter (I) away from excess heat.
2
(front)
I
AUTOMATED LEARNING PROCESS/ACTIVATING CODE
Modifications not approved by the party responsible
for compliance could void the user's authority to
operate the equipment.
*
NOTE:
This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment
and receiver.
* Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
