HAPRO Luxura V10, Manual

Page: 18 / 160

18
++
The hour counter for the lamps should be reset after replacing the lamps.
The parameter “1” will appear at the top of the display and “SAVED” will scroll
across the bottom to confi rm that the number has been saved.
Press <STOP> 2x to exit the confi guration mode.
The message “LUXURA, IT’S YOUR BODY” will appear on the display.
The parameter “1” will appear at the top of the display, and the name of the
parameter “START TIME” will scroll across the bottom.
The main parameter “P1” will appear at the top of the display, and the name of the
main parameter “UNIT” will scroll across the bottom.
Press <START> 1x.
Press the following keys successively:
<STOP> <STOP> <PLUS> <STOP> <MIN>
Reset hour counter for the lamps
The parameter “4” will appear at the top of the display, and the name of the
parameter “RESET LAMP HOUR COUNTER” will scroll across the bottom.
Press <START> 1x.
The parameter “1” will appear at the top of the display, and the name of the
parameter “START TIME” will scroll across the bottom.
Use the <MIN> and <PLUS> keys to navigate to parameter “4”. (Press <PLUS> 3x.)
The number “4” will appear at the top of the display and the message “LAMPS
HOUR COUNTER RESET” will scroll 1x across the bottom. After this de message
“RESET LAMP HOUR COUNTER” will scroll across the bottom.
The number “4” will appear at the top of the display and “OFF” will appear at the
bottom.
Press <PLUS> 1x to change “OFF” to “ON”.
Press <START> to reset the hour counter.
Press <STOP> 2x to exit the confi guration mode.
The message “LUXURA, IT’S YOUR BODY” will appear on the display.
Check
Press the <MIN> and <LIFT> keys at the same time for 3 seconds to read the lamp
hour counter.
The code “HL” will appear at the top of the display and the number “0” will scroll
at the bottom.
3 sec.