49
2.
Push UP/DOWN button to move unit down and push FEED button to feed sequin
3.
Turn main shaft up to the position that needle tip reaches near to sequin hole (around 278
degrees)
Caution
: When turning main shaft, please watch needle. As needle bar push down
gauge is set on needle bar, needle or needle clamp might hit to other parts.
4.
Turn slider screw and set needle position as below drawing
※Please set needle position to front side from sequin hole center
55449B53D9?>
%554<5
Trim position
+
+ '
'
&
&-
-
