11
* Basically, this manual refers to the sequin device (left).
To install sequin device (right), you can use the same procedure as
symmetrical device of left side unless no special instruction for right side
installation.
4.
Installation
4-1.
Exchange of Pressure foot, Needle clamp and Needle
Please note that you cannot install the Sequin device
when original [Front lighting bracket ass’y] is mounted.
In this case, please use the [Front lighting bracket ass’y]
which is designed for Sequin device.
Exchange
1.
Move moving head to need #8.
Unscrew and take cover out. (HCR3)
HCR3
2.
Take lower front panel out.
(Loosen 2 screws and slide to left to take
panel out)
Bed
Loosen screw
Loosen screw
Loosen screw
