46
Adjustment of Feeder Unit (right and left)
1.
Push UP/DOWN button to move device down, and push FEED button to feed sequin
2.
Turn main shaft up to the position that needle tip reaches near to sequin hole (around 278
degrees)
Caution
: When turning main shaft, please watch needle. As needle bar push down
gauge is set on needle bar, needle or needle clamp might hit to other parts.
3.
Loosen slider base fixing screws slightly
k
please use Hex Key in accessary
l
4.
Move position of feeder unit right and left, and set needle position to the center of sequin hole
1C569H9>7C3B5GC
^f\_idi^
5545B+>9D
*B9=@?C9D9?>
%554<5
)<945B1C5
+
+ '
'
&
&-
