13
4-2. Pressure foot height adjustment
1.
Move moving head to needle # 15 and press needle bar down, then set main shaft angle to 0
degree
2.
Loosen screw for pressure foot and set pressure foot on needle plate, then fix screw
(Space between pressure foot and needle plate is 0 mm)
3.
After adjustment of pressure foot height, set main shaft angle to 270 degrees(C point),
then return lower front panel back.
'B5CCEB56??D
%554<5@<1D5
)3B5G6?B@B5CCEB56??D
