180 ML
60 ML
120 ML
AMOUNT OF WATER
TIME
30 min
10 min
20 min
MEAT
FISH
FRUITS
VEGETABLES
FOOD TYPE
STEAMING TIME
30 min
15-25 min
20-30 min
25 min
PACKAGING
Please, check the number of the details before use and address to the seller in case of absence of something from the list below.
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION
/
PP
Tritan
PA
Silicone
PP
Silicone
PP
ABS
PP
ABS
ABS
PP
PA,
stainless steel
PP
MAX TEMP.
MIN TEMP.
QUANTITY
DENOMINATION
№
MATERIAL
Water box filler
Body
Switch rotary knob
Light indicator
Water box lid
Container shoulder
Leak proof nozzle
Steam mouth
Blender cup lid
Food container
Blade base
Seal ring
Pawl of blade base
Blender cup
Additional lid
Manual
P
O
N
M
L
I
H
G
F
E
D
C
B
A
K
J
PP
/
120°C
100°C
120°C
200°C
120°C
200°C
120°C
80°C
120°C
80°C
80°C
120°C
120°C
120°C
1
1
1
1
2
(1 spare)
1
1
1
1
1
1
1
1
1
1
1
/
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
-20°C
120°C
DEVICE
STEAMER - BLENDER
BLENDER CUP CAPACITY
BLENDER TIME OF FUNCTIONING
WATER CONTAINER VOLUME
STEAMER PWR
BLENDER PWR
RATED FREQUENCY
LENGTH OF THE FLEX
SIZE
FIELD OF APPLICATION
ITEM NUMBER
RATED VOLTAGE
50 Hz
110 W
300 W
180 ml
No more than 30 sec
Solid food (for ex. Beef): from 120 to 250g;
liquid: from 150 to 400g.
228 × 171 × 209 mm (length × width × height)
90 cm
Domestic use
23001
220-240 V
PANEL
•
STEAM:
For
«STEAMER»
mode turn the switch in the
«STEAM»
position. Red
indicator lights up and the device starts functioning. Indicator goes out when
water will evaporate. Then turn the switch in
«STOP»
position.
Notice:
Turn the device off two minutes after the functioning, otherwise it could
overheat, that would reduce the time of service of the device.
•
STOP:
To stop the device, turn the switch in
«STOP»
position, and the device will
turn to standby mode.
•
BLENDER:
For
«BLENDER»
mode turn the switch in the
«BLENDER»
position
and hold it - then stirring will be initiated. When the products would be stirred to
the desired condition, release the switch. It’ll return to the
«STOP»
position
automatically and stirring will stop.
Notice:
1.
DO NOT use «BLENDER» mode more than 30 secs at a time. If more stirring
required, turn off the device and repeat the operation in some minutes.
2.
If the device stops after a long functioning, turn it off. Give it to cool down
during 1 hour, and «BLENDER» mode will be available again.
STEAM
BLENDER
INDICATOR LIGHT
STOP
WARNING
• Avoid the contact of wires and plug with heated surfaces and
sharp objects.
• Prohibited to use the device with defective plug or/and wire.
• DO NOT place the device near other working domestic electric
appliances or other source of the heat.
• DO NOT plunge the device into the water to avoid damage of its
electric parts.
• Make sure that voltage corresponds with technical characteristics
of the device.
• Individuals with physical disabilities, and individuals with the lack of
experience can use this device only under the supervision or under
circumstances that they are aware of the precautionary measures
and understand potential danger.
• Children are not allowed to use the device. Keep the device and wire
childproof.
• Unplug the device, follow the safety measures and do not touch
cutting edges of the blade block even if it’s jammed or while cleaning.
Blades are very sharp!
• In «Steamer» mode blender cup is heating, and its touch can burn you.
• While cooking and when opening the cover watch hot steam
coming out from the blender’s cup and from holes for steam on the
body and cover.
• It is prohibited to fill container while the device is functioning.
There is a probability of burn from hot water or steam.
• Special conditions while transportation are not required.
SAFETY SYSTEM
• The device has the safety system, that won’t start the engine till all
the elements are set correctly.
• The device also equipped with the anti-overheat system. Frequent
steaming, continuous period of functioning in blender mode or excessive
quantity of the products can provoke overheat. If the anti-overheat
system was activated, turn the switch in the «Stop» position and
continue work in several minutes, when the device will cool down.
PRECAUTIONS FOR USE
• DO NOT boil blender’s cup. Clean and wash the cup in running water
and sterilize it by the steam.
• DO NOT use microwave oven to heat container or any other part of
the device.
• The device should be placed on a steady and flat horizontal surface.
Make sure, that there is enough free space, since hot steam can
damage around objects.
• DO NOT turn the device in «Steamer» mode with no water.
• DO NOT pour more 180ml of water in the container.
• DO NOT fill the cup more than 400ml level, in case of mixing of the
liquids (see volume mark).
• Use clean water to avoid formation of the scum.
• It is forbidden to put objects in filler or in the hole for steam.
• Always check for the temperature of the products before child feeding.
• Always check uniformity of the products in child food.
Make sure that food doesn’t contain bits and pieces.
• DO NOT heat child food for the second time or more than 30 minutes -
it will contribute to the waste of useful substances.
• After the stirring in blender do not cook the food for the second time.
• Always unplug the device before cleaning of food container.
• Unplug, wash and dry the device before storage.
• It is prohibited to use continuously the «Blender» mode more than
30 seconds.
• All the materials meet safety criteria and residual smell is normal. To get
rid of the residual smell, you should wash the device before the first use.
• Container sides can be colored after the steaming of the colorful
fruits and vegetables. Wash thoroughly the sides after cooling down
of the device. Even in the case of the steady coloring you can continue
using the device without any fear.
• We strongly recommend not to disassemble the device for elimination
of defects by yourself. You can use the table «Troubleshooting» at the
end of the manual.
USAGE
/ STEAM
• Open the cover of the water container by turning it counterclockwise.
Pour clean water and close the cover
(Picture 1, 2, 3)
.
Note:
1.
Pour the amount of water depending on the number of products.
It is prohibited to pour more than 180 ml of water.
2.
It is recommended to use purified (treated) water only. Untreated
water contains minerals, which cause scum formation.
3.
DO NOT pour any other liquids except water into the water container.
4.
After the cooking has been done pour out the residue of water.
• Put on the seal ring on a blade base
(Picture 4)
.
• Put the blade block in the hole of the cup and fix it with pawl,
having it turned clockwise
(Picture 5)
.
Note:
1.
Blades are very sharp - be careful.
2.
Do not forget to put in the seal ring, otherwise the contents
may flow out.
• Insert a food container into a blender cup in such a way, that a protuberance
of the container coincides with a spout of a blender cup
(Picture 6)
.
• Put food in a food container and cover a cup with a lid turning it
counterclockwise until a click
(Picture 7)
.
Note:
1.
The size of parts of hard food should be not more than 2 cm.
2.
A large amount of hard food should be divided into several portions.
3.
Do not steam frozen food, because a device cannot heat it up
to required temperature. Defrost food before cooking.
4.
Do not pour water and other liquids into a blender cup in
order to avoid breaking the device.
• Fasten the leak proof nozzle to the rotation axel
(Picture 8)
.
• Fasten a blender cup by setting it on an electric drive and turning
it clockwise
(Picture 9)
.
Note:
The device does not work until a blender cup is completely snapped.
• Plug in the device
(Picture 10)
.
• Turn the switch in the position
«Steam»
. When a light indicator is
red, the device starts working
(Picture 11)
.
Note:
1.
Time of steaming depends on the amount of water.
2.
During steaming a blender cup gets hot – do not touch it in
order to avoid burns.
• When the time of steaming has finished, the light indicator blows
out. Turn the switch in the position
«Stop»
and wait for
2 minutes
–
residue of steam will leave through the hole. Open the lid of a cup
by turning it clockwise
(Picture 12)
.
• Pour the surplus of water away from a cup.
Note:
If you would like to steam another portion of food, cool the
device for 10 minutes before starting another cooking cycle.
