6
• Insert the batteries (4 x 1.5V AAA) into the battery
compartment according to the polarity indications
marked inside the compartment.
*The digits “ ” will be shown on the LCD.
• Close the battery door and wait until the digits “ ”
are shown on the LCD.
General Instructions
The HAPI Connected Smart Body Analyser applies BIA (bio-impedance Analysis) technology. A weak current
flows through the human body to detect bio-impedance and estimate body fat, body water, muscle mass
and bone mass. The electrical current is small and cannot be felt. This BIA technology is cheap, safe, non-
invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant
information.
The current mentioned above is less than 0.5mA. However, please be aware that anyone with a wearable or
implantable medical electronic instrument, such as a pacemaker, must avoid using this device.
The intended use of this device is for healthy children from 10 to 17 years old and healthy adults.
Insert the Batteries
• Open the battery door at the bottom of the scale.
CAUTION
When the symbol appears, the device will power off. This indicates that you will need to replace the
batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with the
new ones.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn
batteries and device.
If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the
batteries before storing.
Summary of Contents for LS202-B
Page 1: ...User Manual ...
