Hapi LS202-B, User Manual

Page: 13 / 21

13
Manage Your Health
Syncing Data
If you’ve successfully paired the HAPI Connected Body
Analyser with HAPI Connect on your Bluetooth-enabled
smartphone, the measurement data will be transmitted
to your mobile via Bluetooth.
Data syncing via Bluetooth is only possible when the
results are tied to a specific user ID after measurement.
CAUTION
Interference may occur in the vicinity of equipment marked with the following symbol [] . The Analyser
may also interfere with nearby electrical equipment.
To enable data syncing, this product should be paired to a smartphone compatible with Bluetooth
4.0.
How to circumvent possible interference
1. The range between the Connected Smart Body Analyser and the smartphone should be
reasonably close, from 1 to 10 meters. Make sure there are no obstructions between the Analyser
and the Bluetooth smartphone to obtain quality connection.
2. To avoid interference, other electronic devices (particularly those with Bluetooth turned on) should
be kept at least 1 meter away from the Analyser.
The symbol “ ” will disappear after successful data
syncing, and you may check your personal health data
stored in the HAPI Connect app on your smartphone.
If the data syncing fails, the symbol will remain. The
pending measurement data will be temporarily kept
in the scale and transmitted to your smartphone the
next time the scale successfully connects to the HAPI
Connect app over Bluetooth.
Successful Bluetooth connection
Data sync in progress. If successful, the symbol disappears. If sync fails, the symbol remains.
SET
SET