10
SET
Initialising the Scale
If your first weight reading was inaccurate, you may need to initialise the scale. This process is necessary
because the scale was moved during the shipping process. Initialising the scale “re-seats” the internal parts,
allowing the scale to find the correct “zero.” Here is how to initialise your scale:
This initialisation process must be repeated if the scale is moved. At all other times, step straight on the scale.
Weight-Only Operation
The HAPI Connected Body Analyser can also operate as a conventional weight-reading scale. No special
programming steps are required.
Once the scale is initialised, as previously described, you can simply step on the scale to measure your
current weight. In this process, weight is the only measurement that is taken.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.
2.
Step onto the scale platform and remain still while the scale measures your weight.
3.
The scale will display your weight.
4. The scale will automatically turn off after a few seconds.
Note:
The weight taken from this operation will not be saved in the scale’s onboard memory and will not be
transmitted to the app.
1. Place the scale back on a hard surface floor.
3. 0.0 will be displayed
2. With only one foot, step on the platform and
remove your foot.
4. The scale will switch off and is now ready for use.
SET
SET
Summary of Contents for LS202-B
Page 1: ...User Manual ...
