EN
Haojue HJ125-8 99011H30220H000 V02 EN+FR 2015-3-2
(47)
TIRES
Periodic checks should be performed for tire pressure
and tire wear status.
To ensure maximum safety and
life, check the tire frequently, in addition to the scheduled
inspections.
B
WARNING
Tire pressure and wear status are very important
for the performance and safety of the motorcycle.
Be sure to check tire pressure and tire wear status
regularly.
Tire pressure
Under normal temperature, test the tire pressure by using
a tire pressure gauge, set the pressure base on the
pressure value recommended by this manual.
If the
pressure is too high or too low, it will affect ride stability,
and will cause the tire to wear.
Standard for tire pressure under normal temperature
Solo riding
Double riding
kPa
kgf/cm
2
kPa
kgf/cm
2
Front wheel
175
1.75
175
1.75
Rear wheel
200
2.00
225
2.25
B
WARNING
The tire pressures and surfaces are significant. If
they are neglected, the safety of the rider may be
endangered and the motorcycle may be damaged.
B
WARNING
Please inspect the internal pressures and surfaces
of the tires of the motorcycle frequently.
Tire surface status
There are serial “T.W.I.
;
” marks
1
(tire wear indicator) in the edge of
the tire. Check the bulge stock
2
of
T.W.I. in the tread near the mark. If
the tire wears off to reach the bulge
stock, the tire should be replaced.
Check the damage
3
(punctures or fractures) on the tire
surface visually. As surface damage may impede driving
stability, such tires should be replaced.
B
WARNING
Replace a tire when worn to the specified limit, or if
find damage such as cuts or cracks.
Tire specification
When replacing a tire, make sure the new tire condition
is same as described in this manual.
Tires with
different specifications may affect driving stability of the
motorcycle.
45
Haojue HJ125-8 99011H30220H000 V02 EN+FR 2015-3-2
(47)
