4
1. SAFETY INFORMATION
Before using the product, please read the safety information thoroughly and use it properly.Alerts declared in the
manual are classified to Danger, Warning and Caution by their criticality
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury
Danger
Warning
Caution
1. The contents of this manual may be changed without prior notification.
2. Before using the product you have purchased, check to make sure that it is exactly what you ordered.
3. Check to make sure that there is no damage or abnormality of the product during delivery.
4. The ambient temperature do not exceed 0 ~ 50 ℃ & The ambient humidity do not exceed 35 ~ 85 %RH (no icing).
5. Do not use this product at any place with corrosive(especially noxious gas or ammonia) or flammable gas.
6. Do not use this product at any place with direct vibration or impact.
7. Do not use this product at any place with liquid, oil, medical substances, dust, salt or iron contents.
(Use at the Pollution level 1 or 2)
8. Do not polish this product with substances such as alcohol or benzene.
9. Do not use this product at any place with excessive induction trouble, static electricity or magnetic noise.
1. If there is a possibility of an accident caused by errors or malfunctions of this product, install external protection
circuit to prevent the accident.
2. This product does not contain an electric switch or fuse, so the user needs to install a separate electric switch or
fuse externally. (Fuse rating : 250 V 0.5A)
3. When setting, “Input type selection number” must be selected in the Group Input(G.In) and also “Output type
selection number” must be selected in the Group Output(G.Out) before moving to other group. If not, data of other
group will be changed to the initial stage.
4. To prevent defection or malfunction of this product, supply proper power voltage in accordance with the rating.
5. To prevent electric shock or devise malfunction of this product, do not supply the power until the wiring is completed.
6. Since this product is not designed with explosion-protective structure, do not use it at any place with flammable or
explosive gas.
7. Do not decompose, modify, revise or repair this product. This may cause malfunction, electric shock or fire.
8. Reassemble this product while the power is off. Otherwise, it may cause malfunction or electric shock.
9. It you use the product with methods which are not specified by the manufacturer, there could be bodily injuries or
property damages.
10. Due to the danger of electric shock, use this product installed onto a panel while an electric current is applied.
Do not touch or contact the input/output terminals because they may cause electric shock.
Danger
Warning
Caution