11
6-3. Function of 4 digits LED
1. Digital Formation
4D
3D
2D
1Digit
2. Possible range of maximum indication using the or button.
3. Rounding Up & Off of Digits
·When it becomes “9” in any digit besides the 4th digit (4D), it will
be rounded up to the next digit when the button
is pressed continuously.
·Rounding Up
·When the 4th digit indicates “9”, there will be no changes despite
pressing of continuously.
① Represented data is “+”.
When it becomes “0” in any digit besides the 4th digit, it will be rounded
off to the next digit when the button is pressed continuously.
② Represented data is “-”,
When “9” is indicated, it will be rounded off from the next digit when the
button is pressed continuously.
·Rounding Off
4. Maximum & Minimum Indication
It indicates the greatest or the least of the selected item when it gets out of the range of the selected item (parameter).
If WTM = 0.00 ~ 99.59
If user selects over 99.60, it sets up 99.59, which is the maximum value. Moreover, it sets up the
minimum value of WTM 0.00 if less below -0.01 is selected.
Ex.)
5. Operation of Button
4D
3D
2D
1Digit
It blinks in its change operation position.
7. Position of “ - (minus)”
·It is always indicated in the 4th digit.
6. Operation of button
Use , , buttons to change to the desired value. Then move to the next setup item
(parameter) after registering with the button.
However, this setup value must be within the range of each setup item (parameter). button leads to the
next setup item without pressing any other buttons besides the button.
