16_
outdoor vandal dome camera
outdoor vandal dome camera
8.
Connect the audio/alarm cable connector to the audio/alarm cable port of the camera body.
9.
Join the camera body with the mount plate.
2x
TR20
10.
Adjust the lens to the desired direction with reference to “
Adjusting the monitoring direction for the
camera
” section. (page 18)
`
If you tilt the lens, you may need to adjust the lens as this may block the screen.
`
Connect a monitoring device to the USB port and then monitor and adjust it. (page 24)
Assembling the dome cover
[Directly installing on wall/ceiling]
1.
Assemble the dome cover.
J
`
Make sure to firmly tighten the fastening screws so that there is no water damage issue.
4x
TR20
