14_
outdoor vandal dome camera
outdoor vandal dome camera
[Installing using pipe]
1.
When connecting and installing a pipe, you can remove the wiring hole cover of the dome cover.
As shown in the picture, remove the wiring hole cover of the lower dome cover and install the pipe
according to the instructions below.
2.
Join the conduit adaptor (separately sold) to the mount plate.
3.
Mount the pipe to the conduit adaptor.
4.
Fix the mount plate using appropriate screws.
5.
Take out the necessary cables from among the network and audio/alarm cables through the pipe.
Tighten two screws
Installation (camera body)
J
`
Use a cable bushing compliant with the network cable to be connected.
-
Camera main: use a cable with the diameter of Ø5 to Ø6.5
`
You can only use a network cable with a diameter of Ø6.5 or less.
[Installing the network cable] (IP66)
1.
Remove the cable bushing next to the audio/alarm cable port from the camera body.
2.
Remove the protruding part of the 1-hole cable bushing that was removed from the camera body.
3.
Use the cap installer to pass through the RJ45 cable.
Cap Installer
