English _
15
!
INST
ALLA
TION & CONNECTION
Installation (camera body and dome cover)
1.
Connect the safety wire to the mount plate.
2.
Mount the camera body to the mount plate.
`
Mount it to fit the hinges as shown in the image.
3.
Pull out the cable bushing from the camera body, as shown in the figure.
[Installing the network cable] (IP66)
J
`
Use a cable bushing compliant with the network cable to be connected.
-
Camera main: use a cable with the diameter of Ø5 to 6.5
`
You can only use a network cable with a diameter of Ø6.5 or less.
4.
Remove the protruding part of the 1-hole cable bushing that was removed from the camera body.
5.
Use the cap installer to route the network cable through the cable bushing.
Summary of Contents for PNM-C32083RVQ
Page 1: ...NETWORK CAMERA User Manual PNM C32083RVQ PNM C16083RVQ...
Page 33: ......
