Hanwha Vision PNM-C32083RVQ, User Manual

Page: 19 / 33

English _
19
!
INST
ALLA
TION & CONNECTION
Adjusting the monitoring direction for the camera
Moving the camera module (Pan)
Tilt
Lens Rotation
` Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Here, moving the camera module along the rail is called “Pan”, adjusting the slope of the camera module is
called “Tilt”, and rotating the camera module on the lens axis is called “Rotation”.
- The rotation angle of Pan is -0 to +360˚ for each module.
- The rotation angle of Tilt is 0 to +73˚.
- The rotation angle of Rotation is 0˚ to +90˚.
J ` The image can be covered up by the camera case depending on the angle.
` Do not pan over the specified rotation angle. It might damage the cable leading to a product malfunction.
`
Methods of adjustment
1. After installing the camera in consideration of the direction to monitor, adjust the Pan angle along the
bottom rail.
2. Adjust the horizontal angle so that the image does not appear to be reversed during rotation.
3. Adjust the tilt angle so that it points in the direction to be monitored.
Installation precautions when using the IR mode
~ <Auto1>: Optimized for IR light to radiate evenly when the center of the object is saturated.
~ <Auto2>: Optimized for IR light to evenly radiate at the overall IR brightness.
[Example of installing the ceiling mount]
<Factory default direction>
CH 2 CH 2
CH 4 CH 4
CH 3 CH 3 CH 1 CH 1
Front direction
CH 2 CH 2
CH 3 CH 3
CH 1 CH 1
CH 4 CH 4
Front
direction