Section 4: Operation
Operator Manual
1700w™
(Rev 1)
© Hantle 2010
4.15
4.2.5 Loading the Receipt Paper
Step 1
Open the top Bezel. (See 4.1.4 Opening
the top Bezel.)
Step 2
Place the paper onto the supplied spindle
with the Coated Side Out as shown in the
picture. Feed the paper out through the
back, where it will curl back under the
tension bar.
Step 3
Prepare the new paper roll. Note below.
NOTE:
1.
Make sure the roll is in its proper roll form. (A deformed roll may cause jamming
problems.)
2.
When replacing the new roll, make sure the end of the roll paper is clean cut
(See Fig. 1).
Fig. 1