manualshive.com logo in svg

HANTEL HTT-800A, User Manual, Page: 41 / 105

Share
Download
HANTEL HTT-800A User Manual Download Page 41

CDMA WLL User’s Guide    

         

                      HTT-800A

 

 

 

-

41- 

 

- 

If the saved address is two digits, pick up 

the handset and press the first digit and then 

press the second digit and hold it down then 

a call is made.   

- 

If the saved address is three digits, pick up 

the handset and press the first digit , second 

digit and then press the third digit and hold it 

down then a call is made. 

 

Note : 

If you attempt a Speed Dialing while the Speed Dial 
Function is OFF, an error tone will sound to indicate 
wrong operation. 

 

5.1.2 Redialing 

Used for dialing the latest dial phone number. 

1.  Pick up the handset and long press to <*>. The 

line is connected to the number called latest. 

This function would not work if you tried no call 

after power on. 

2.  Speak to the called party when the line is 

connected. And Hang up the handset after 

conversation. 

 

 

Summary of Contents for HTT-800A










































































































Reviews:

No comments