manualshive.com logo in svg

HANTEL HTT-800A, User Manual, Page: 16 / 105

Share
Download
HANTEL HTT-800A User Manual Download Page 16

CDMA WLL User’s Guide    

         

                      HTT-800A

 

 

 

-

16- 

 

■ 

Avoid shock or impact. 

■ 

We recommend you to charge the backup 

battery before initial use for 10/12 hours. 

Backup battery may be discharged during 

delivery. 

■ 

This device complies with part 15 of the FCC 

Rules. Operation is subject to the following two 

conditions: 

-

  This device may not cause harmful 

interference, and 

-

 

This device must accept any interference 

received, including interference that may 

cause undesired operation. 

 

1.3 Care and Service 

■ 

If the unit fails for any reason, do not attempt to 

disassemble; contact the telephone service 

provider for assistance. 

■ 

Unplug the FWT from the wall outlet and 

remove antenna (or disconnect antenna cable) 

before cleaning. Do not use liquid or aerosol 

cleaners. Use a damp cloth for cleaning.   

■ 

If any of the following conditions exist: Unplug 

the unit at the wall plug, remove battery, and 

call the service provider. 

Summary of Contents for HTT-800A










































































































Reviews:

No comments