manualshive.com logo in svg

HANTEL HTT-800A, User Manual, Page: 17 / 105

Share
Download
HANTEL HTT-800A User Manual Download Page 17

CDMA WLL User’s Guide    

         

                      HTT-800A

 

 

 

-

17- 

 

-

 

The unit has been exposed to rain or water. 

-

 

Liquid has been spilled into the unit. 

-

  The power supply cord is damaged or 

frayed. 

-

 

The unit has been dropped or damaged. 

-

  The unit does not work normally by 

following the operating instructions. 

Note: 

■ 

Don't disassemble or modify this product 

deliberately. 

■ 

Use only an approved adapter. 

■ 

Don't touch adapter with wet hands. 

■ 

Don't install this product in dusty area. 

■ 

Avoid areas near sunlight, heating apparatus, 

vibration  

■ 

This product is designed for being used within 

commercial power. In other voltage area, 

please install voltage stability device and use 

it. 

■ 

When struck by lightning, unplug to protect 

terminal from lightning damage and fire. 

■ 

Don't install this product near other electronic 

appliance. 

■ 

When installing battery, be careful of polarity. 

■ 

Install in area of good signal. ( Signal LED is 

Summary of Contents for HTT-800A










































































































Reviews:

No comments