manualshive.com logo in svg

HANTEL HTT-800A, User Manual, Page: 13 / 105

Share
Download
HANTEL HTT-800A User Manual Download Page 13

CDMA WLL User’s Guide    

         

                      HTT-800A

 

 

 

-

13- 

 

1.  Before  You  Start 

 

1.1 SAFETY PRECAUTIONS 

 

1.1.1 

Warning 

To reduce the risk of fire or electric shock, do not expose 

this product to rain or moisture. Do not use this product 

near swimming pools or other bodies of water. 

Telephones with multiple terminating impedance, should 

be set for 600ohms. 

The adapter provided along with FWT is designed for a 

rated voltage only. So it may cause trouble, if the 

adapter is used out of a rated voltage range. 

 

1.1.2 

Important 

Before installing or operating this product, read this 

information. 

 

1.2

 

Optimal Phone Performance 

■ 

Do not use the unit with a damaged antenna. 

Have your antenna replaced by a qualified 

technician immediately. Use only a 

manufacturer-approved antenna. Non-approved 

antennas, modifications, or attachments could 

impair call quality, damage the Terminal / 

Summary of Contents for HTT-800A










































































































Reviews:

No comments