- 3 -
2. General Precautions when using the equipment
a. Before using the equipment, be sure to read the user manual and
basic principles, usage and safety precautions for your awareness.
b. When not in use, pull the parking break so that vehicle may not
move. Connect the gear to neutral and place wedges so that the
tires may not move.
c. When you move the P.T.O, you should definitely press the clutch
fully. If you hear sound from the Transmission, please check and
request it to the dealer. If the sound occurred and you use it
continually it might break the P.T.O and Transmission.
d. Before you operate the Equipment, always get out the Beam of the
outrigger and get down the outrigger cylinder. In particularly, you
must check it to the ground surface outrigger cylinder very well.
e. During the operation of Equipment, expert operator is only allowed
to the operation limits.
f. Do not operate equipment around the high tension as this is so
dangerous.
g. Prior rotating the Boom, make sure that there is no dangerous
things beside it when you rotate it. (Especially building, signboard,
high tension, peoples etc...)
h. People should not pass around the equipment. Follow the
instructions as prescribed.
i. When you're driving the Aerial lift Truck, you should duly reach
the Boom Rest and the Boom should always fold.
j. Never use the Boom from pulling something.
k. Please do not operate the Equipment from the front of the Truck
CAB.
Summary of Contents for HS Series
