Page EN-21
Dishwasher operation
1. Press the button (11) in order to inter-
rupt the dishwashing programme.
The remaining duration display (6) will re-
main permanently illuminated.
2. If required, add extra dishwasher deter-
gent.
3. Only press on the
P
(13) button until the
programme symbols (1) go out and the re-
maining duration display (6) is set to “zero”.
4. Select the new programme with the
P
(13) button.
5. Select any additional options required as
described on the previous pages.
6. Start the programme.
Adding dishes
CAUTION!
Risk of scalding!
If you open the door of the dishwasher,
hot steam will come out.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can add more dishes even if the dish-
washer programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
(11)
1. Press the button (11) in order to inter-
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. Open the dishwasher door slightly and
wait until both wash arms have come to a
stop.
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
6. Press the button once again (11).
After approximately 10 seconds of inactiv-
ity, the appliance will continue.
A signal tone will sound at regular
intervals while the wash programme is
paused.
Button lock / child lock
(12)
(4)
The dishwasher buttons can be locked, e.g.
for childproofing purposes.
• To switch the button lock
– on, press the plus and minus button /
(12) and hold them pressed in until the
lock symbol (4) appears in the display.
The buttons are locked
– off, press both buttons again and hold in
until the lock symbol in the display goes
out. The buttons are unlocked.
