Page EN-18
Dishwasher operation
Preparation
Requirements:
– You have read chapter „Safety“ on page
EN-6 and understand all the safety notices.
– The appliance is set up and connected as
described in chapter „Installation, connec-
tion and commissioning“ on page EN-24.
– Dishwasher detergents, rinse aids and
dishwasher salts and multitabs are added.
1. Open the valve completely.
2. Close the dishwasher door.
3. Press the button (18) to switch on the
dishwasher.
You will hear a signal tone and all LEDs
will illuminate briefly.
After a short time, the programme display
reading
ECO
(1) will show.
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the fi rst dishwasher
cycle to remove residues from the manufac-
turing process and to ensure that the device
functions perfectly. Carry out this test run
when the dishwasher is empty and without
any dishwasher detergent.
1. Select the suitable dishwashing pro-
gramme based on the “Dishwasher pro-
gramme table”, see page EN-17.
(13)
(6)
(1)
2. Press the
P
(13) button as often as re-
quired until the display shows the desired
programme symbol (1) and the pro-
gramme duration (6).
3. For the washing programme,
– if you wish to make further adjustments,
continue with „Additional options“.
– launch it, continue with „Starting the
dishwashing programme“ on page EN-19.
Additional options
You can combine the various dishwashing
programmes with additional options. The
additional options must be selected before
starting the wash programme.
Intensive cleaning
(7)
(17)
This option allows you to fur-
ther improve the cleaning results.
This option is not available with the pro-
grammes
,
and .
• To switch the option
– on, press the button
(17).
In the display, the symbol
(7) will light
up.
– off, press the button again. The symbol
will disappear in the display.
Dishwasher operation
