Operation
Page 21
2. Press and hold the ‘AUTOSTART’
button (24) for 3 seconds.
The ‘AUTOSTART’ button will
light up in blue, and the but-
ton will flash.
The display will show the cur-
rent time ‘CURRENT TIME’
and the start time ‘START
TIME’.
When setting the current
time and start time, pay
attention to the time infor-
mation AM / PM in the display.
The display is necessary be-
cause times are displayed in
12-hour format. Morning hours
0:00 to 11:59 are marked by AM.
The afternoon hours 13:00 to
23:59 are shown in the form of
1:00 to 11:59 PM.
3. Press the and buttons (21)
to set the current time.
4. Press the and buttons (18)
to set the start time.
5. If the current time and the
starting time have been set,
press the button to set the
‘AUTOSTART’ function.
The button will be continu-
ously lit up in blue.
As soon as the start time has
been reached, the heating or
brewing process will start.
3 beeps will sound as soon
as the brewing process has
ended. The notification in the
display will disappear after
approx. 20 seconds, and the
appliance will switch to stand-
by mode.
Keep warm function
This function will allow you to
keep the heated water or the tea
you have made at a temperature
of at least 60ºC for up to 30 min-
utes.
• Press the ‘Keep warm’ but-
ton (23) during heating or after
the water has been heated or
the tea has been made.
The ‘Keep warm’ button will be
continuously lit up in blue.
Once the brewing or heating
process is completed, the ap-
pliance switches to the keep
warm function for 30 minutes.
The display shows the current
water temperature, and the
time will count down.
After 30 minutes, the appliance
will automatically switch to
standby mode.
