Page EN-13
Adding laundry and detergent
Adding laundry and detergent
Loading laundry
NOTICE
Risk of fi re/damage!
Improper handling of the appliance
can lead to fi re/faults.
■
Never try to open the loading door
with force whilst a cycle is in progress
or once a cycle has ended. Only open
the loading door once it has been
automatically released approx. two
minutes after the cycle has ended.
1. Open the loading door (15), by pulling the
handle slightly forward.
2. Load the laundry.
Observe the maximum laundry load per-
mitted when loading the appliance, do not
jam any pieces of laundry between the
loading door and rubber sleeve, and follow
the tips on page EN-23.
3. Push the loading door closed until you
hear it snap shut.
Adding detergent/fabric-care
products
• Pull out the dispensing drawer (1) and fill
the compartments as follows before the
cycle starts:
(1)
Dispensing compartment II (left)
Dispensing compartment II is intended for the
main wash.
– Fill it with powder or liquid detergent or an-
ti-limescale agent for every wash.
200
150
(21)
– If you wish to use liquid detergent, place
the partition (21) in dispensing compart-
ment II before filling.
Fabric softener/starch
compartment
(middle)
– Dispense fabric softener or starch here ac-
cording to the information supplied by the
manufacturer.
Dispensing compartment I (right)
Dispensing compartment I is only intended
for prewashes. We recommend using pre-
wash cycles only for very dirty clothing.
– Fill the dispensing compartment only if you
select the cycle “Cotton with prewash” ,
or have additionally selected prewash with
the “Option” button (9).
– Fill detergent compartment I with ¼ of the
detergent and fill detergent compartment II
with ¾ of the detergent.
• Push the detergent drawer back in after
filling.
Summary of Contents for HWM8T3I16C
Page 84: ......
