Hanseatic HWM8T3I16C, User Manual

Page: 61 / 84

Page EN-19 Operation: Additional functions
Additional functions can be used to change
a cycle’s standard values and adjust them
to your laundry in order to achieve the best
possible washing result or maximum effec-
tiveness.
The setting options available to you are
based on the selected cycle (see table on
page EN-16).
If touching the respective key has no effect,
none of the additional functions are available.
Changing the washing water
temperature
Temp. Temp. Temp. Temp.
(11)
Verschmut-
zungsgrad
Fleckentyp
Startzeit-
vorwahl
Fleckentyp Fleckentyp Fleckentyp
Startzeit- Startzeit- Startzeit-
vorwahl vorwahl vorwahl
Schleudern Option Schleudern Schleudern Schleudern Option Option Option
Save+/
Schnell
After selecting the desired cycle, the field for
the washing water temperature will show you
the highest temperature for this cycle.
• To decrease the washing water temper-
ature, repeatedly press the “Temp.” but-
ton (11) until the desired temperature is
shown on the display ( stands for “cold
water”).
You can now select further additional
functions or start the cycle.
Changing the spin speed
After selecting the desired cycle, the field for
the spin speed will show you the highest spin
speed for this cycle.
Please note: The spin speed affects the noise
emissions of the appliance and the residual
dampness of the laundry. The higher the spin
speed, the higher the noise emissions and
the lower the residual dampness.
Schleudern Schleudern Schleudern Schleudern
(10)
Verschmut-
zungsgrad
Temp.
Startzeit-
vorwahl
Temp. Temp. Temp.
Startzeit- Startzeit- Startzeit-
vorwahl vorwahl vorwahl
Option Option Option Option
Save+/
Schnell
• To decrease the spin speed, repeatedly
press the “Spin” button (10) until the de-
sired spin speed is shown on the display
( stands for “drain without spinning”).
You can now select further additional
functions or start the cycle.
Selecting the degree of
soiling
Verschmut-
zungsgrad
(13)
Startzeit-
vorwahl
Startzeit- Startzeit- Startzeit-
vorwahl vorwahl vorwahl
Temp. Schleudern Fleckentyp Option Temp. Temp. Temp. Schleudern Schleudern Schleudern Fleckentyp Fleckentyp Fleckentyp Option Option Option
Save+/
Schnell
After selecting the desired cycle, the degree
of soiling field shows you whether there is a
default degree of soiling setting for this cycle.
• To change the degree of soiling, repeat-
edly press the “Degree of soiling” but-
ton (13) until the desired degree is shown
on the display:
“Light”,
“Moderate” or
“Heavy”.
The setting influences the cycle time and
the washing water temperature.
You can now select further additional
functions or start the cycle.
Operation: Additional functions