Start-up
Page EN-27
23. Put the two covers (15) back in place.
24. Align the appliance as described in chap-
ter “Moving and unpacking” on page EN-22.
Changing the door hinges of the
freezer compartment
(25)
(1)
1. Unscrew the hinge screw (25) under the
freezer compartment (1). Use a cross-tip
screwdriver.
2. Open the freezer compartment door and
remove the door and hinge.
3. Remove the hinge from the door pin.
(26)
4. On the door latch, remove the covers
on the screws (26) and unscrew the two
screws.
5. Turn the door latch 180° and fix it to the
opposite side. Use the screws (26) to do
so.
Make sure that the locking tappet screw
holes are placed exactly over the mark-
ings in the appliance wall.
6. Push the two covers into the door latch
again.
7. To install the freezer compartment door
on the other side, turn it 180°.
8. Insert the freezer compartment door with
the upper door pin in the opening at the
top of the freezer compartment.
(25)
9. Place the hinge on the lower door pin and
screw it securely to the appliance using
the hinge screw (25).
Make sure that the locking tappet screw
hole is placed exactly above the markings
in the appliance wall.
10. Cover the holes left by unscrewing the
bearing plate and locking tappet on the
opposite side of the freezer compartment
with the two round and the rectangular
cover stickers.
11. Close the freezer compartment door.
