Start-up
Page EN-23
Space requirement according to
appliance dimensions
C
B
A
D
E
A:
550 cm
B:
1130 cm
C:
940 cm
D: 50 cm
E:
135°
– To prevent the formation of a flamma-
ble gas-air mixture in the event of a
leakage in the refrigeration circuit, the
installation space must have a mini-
mum size of 3 m³.
– Suitable locations are dry, well-venti-
lated areas that are cool if possible.
– Unsuitable locations are ones with di-
rect sunlight or which are directly next
to an oven, hob or radiator.
– The following minimum distances
must be maintained:
to electric stoves
3 cm
to oil and coal burning
stoves
30 cm
to other cooling appliances
2 cm
to washing machines and
dishwashers
2 cm
3. If underfloor heating is installed at the set-
up location, place the cooling appliance
on an insulation plate made from solid
material.
4.
Check the position with a spirit level.
(6)
5. Level out any unevenness in the floor us-
ing the two screw feet (6).
6. Close the appliance door (2).
7. Tilt the appliance slightly back and screw
in/unscrew the screw feet (6).
8. Stand the appliance back up again and
check the alignment with a spirit level.
9. Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the ap-
pliance door.
Cleaning before use
• In order to remove the odour which is
present in all new appliances, wipe the
interior with diluted vinegar prior to first
use. Then wipe it out with clean water
and dry all of the parts off afterwards.
