Start-up
Page EN-26
11. Tip the appliance backwards (maximum
45°) so that you can also reposition the
lower door hinge.
(6)
(20)
12. Turn both screw feet (6) outwards.
13. Unscrew the lower hinge (20).
(21)
14. Unscrew the screw (21) on the bottom
left of the housing and reinsert it on the
opposite side.
(23)
(22)
(24)
15. Loosen the nut (22) on the hinge bolt (23)
with a 10 mm spanner.
Put the nut, the washer and the spring
ring (24) carefully to one side.
16. Reverse the hinge; push the hinge bolt
through from the other side and fix it, and
put the spring ring back in place.
(6)
(20)
17. Screw the hinge (20) back on the oppo-
site side.
Use the screwdriver to tighten the
screws by just 2 to 3 turns, and then use
the 8 mm spanner to tighten them fully.
18. Screw the screw feet (6) back in too.
19. Reinsert the appliance door (2).
(13)
(15)
(19)
(18)
20. Reattach the upper hinge (18) with the
three fixing screws (13).
Also refit the screw (15) on the opposite
side, and reinsert the blind plugs (19) on
the other side of the appliance door.
21. Place the cover (17) back on the appli-
ance. Push down on both sides (left and
right) of the front of the cover until you
hear it click into place.
22. Refit the two screws (16).
