Page EN-16
Dishwasher detergents, rinse aids and dishwasher salts
Adding dishwasher salt
NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface by using dish-
washer salt in an improper manner.
■
Only use dishwasher salt which is spe-
cifi cally intended for dishwashers.
■
Always wipe away spilt dishwasher
salt immediately with a damp cloth.
■
Immediately after adding the dish-
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher salt
to the dishwasher salt dispenser
– if you are only using multitabs which
already contain dishwasher salt,
– if the water hardness in your area is in the
0–5° dH range.
(10)
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– when the “Add dishwasher salt” LED (10)
lights up.
(19)
1. Remove the lower dish rack (16).
2. Turn the cover on the dishwasher salt dis-
penser (19) anticlockwise and remove it.
3. Upon first use: Add 1.5 l water to the
dishwasher salt chamber so that it doesn’t
clump.
(b)
4. Place the supplied filling funnel (b) on the
dispenser opening.
5. Add dishwasher salt up to the edge of the
compartment.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt
compartment (19) in a clockwise direction
up to the stop point.
8. Replace the lower dish rack (16).
9. Launch a dishwashing programme
straight away or carry out a test run
immediately upon first use using
(see „Test run“ on page EN-33).
