EN-13
HFD17690A2S
Preparing the appliance
Preparation
Adjusting the doors
It may be that the doors are not on the same
height, even if the fridge-freezer itself is com-
pletely level. In this case you can adjust the
position of the doors by raising the one that is
lower.
1. Open the door and lift it up. This will create
a gap between the bottom door hinge and
the door.
2. Insert the supplied attachment ring into the
gap.
3. Close the door.
4. Check the position of the doors and insert
more attachment rings if necessary.
Attaching the door handles
The appliance is supplied with four door handles,
– two for the fridge
– two for the freezer.
The door handles can be distinguished by the
size of their curve. The handles for the freezer
have a more arched curve.
1. Screw the 8 supplied bolts
14
into the doors
using a cross-head screwdriver.
14
16
15
2. Place the door handles
16
onto the bolts
14
.
3. Tighten the fixing screws
15
by turning them
clockwise with the supplied hex key.
Fitting the hinge cover
• Attach the hinge cover to the base of the
appliance using the 3 supplied screws.
