6
7
English
Important! The fitting must be installed,
flushed and tested after the valid norms.
Assembly
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the basin.
3. Slip the slide washer, washer and collar nut
over the hose and threaded base and tighten
the collar nut by hand.
4. Tighten screws.
5. Connect the supply pipes to the isolation val-
ves;
cold right - hot left.
6. Connect the hose with hose nut, taper sleeve,
disc and washer.
7. Connect the pull rod to the pop-up waste.
The hot and cold supplies must be of equal pres-
sures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
Der Auslauf läßt sich ca. 45 cm aus dem Auslauffutter
herausziehen.
Technical Data
This mixer series-produced with waterdim-
mer (flow limiter)
Rate of flow with waterdimmer: 7 l/min 3 bars
Rate of flow without waterdimmer: 14 l/min 3 bars
Operating pressure: max. 10 bars
Recommended operating pressure: 1 - 5 bars
Test pressure: 16 bars
Hot water temperature: max. 80° C
Recommended hot water temp.: 65° C
Test certificate: WRAS
0209015
Hansgrohe single lever mixers can be used toge-
ther with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
If the continuous water heater causes any problems
or there is not enough flow of water, the waterdimmer
(7a) located behind the aerator must be removed.
To adjust the hot water limiter on single lever mixers,
please see page 14.
No adjustment is necessary when using a continuous
flow water heater.
Spare parts
(see page 3)
1 handle 15092XXX
1.1 screw cover 96338000
2 flange 94192XXX
3 nut 94194000
4 cartridge cpl. 92730000
5 locking screw for handle 96059000
6 seal 95008000
7 aerator cpl. (10) 13085000
aerator gold plated 94980990
8 pop up rod 92620XXX
8.1 diverter knob 94066XXX
8.2 pull rod 94067000
9 fixing set 95049000
10 spout cpl. 96524XXX
11 non return valve DW 10 (10) 96456000
12 hose 900 mm 96511000
13 fixing set for hose connection 96444000
Special accessories
X special tool set 58085000
( order as an extra)
XXX
= Colors
000 chrome plated
090 chrome plated/gold plated
810 satinox
®
880 satin chrome
