25
It may exit (DX) or (LOCAL) to switch operations and default the
current setting if there is no operation within five seconds.
14.3.4
Enter USB/ LSB:
Short press [
SET
] for the fourth time. "
AM
" display flashes and SW
works on the normal short-wave receiving mode. -Short press
[
MODE
], the "
USB
" flash to enter the upper side search mode of
single sideband. SSB search function will be end up at 5 seconds later.
-When "LSB" flashing, short press [
MODE
], the lower sideband "LSB"
flashing or not flashing, or the "
SSB
" flashing, short press [
BAND
], it
can switch to SW Band.
On SW state, tune off the radio, and then tune on the radio, LSB or
USB will enter the searching mode automatically.
If you would like to exit the USB and LSB Searching mode, short press
the [
SET
] 4 times, press lightly [
MODE
], it can switch to "
AM
" flash.
And then, press lightly the [
SET
], it can exit the Searching mode of
LSB and SSB. Short-wave (SSB) received are as follows frequently-
used short-wave single-side band communication common
frequencies (KHz) are shown:
•
The unspecified frequency is USB Guangzhou coast station: 8.716/
8.782/ 13.107/ 13.149/ 13.182/ 17.398/ 19.772/ 19.793/ 22.735
•
Tianjin coast station: 13.092
•
Shanghai coast station: 8.773
•
Yantai coast station: 4.381/ 8.764/ 1.3077/ 17.332
•
Zhanjiang coast station: 2.182/ 6.200/ 6.501
•
Zhoushan Haixiang shipping company: 12.408
•
Xiamen coast station: 4.314/ 8.453/ 12.876
•
U.S. Army Radio of Guam&Hawaii:
10.320/ 13.362 (daytime)/ 5.765/ 6.350 (night)
•
Manila Airport, Philippines: 8.942
•
Iceland radio: 13.855
•
East Asia Pacific Weather Station: 8.828
