27
14.4.1
Bandwidth setting on AIR:
Short press [
SET
] for the first time. When the bandwidth (BW)
flashes, short press [
MODE
] to set the bandwidth to be 6.00KHz,
4.00KHz, 3.00KHz, 2.50KHz, 2.00KHz, 1.80KHz and 1.00KHz.
14.4.2
Squelsh level (SQ) adjustment:
Short press [
SET
] for the second time, SQ (SQ.OFF.00) will flash; then,
short press [
MODE
] to select SQ of (SQ.ON.01.-SQ.ON.09).
Short press [
SET
], "VOL SQ" stop flashing. -And also no operation
within 5 seconds, default current operation. Short press [
MODE
] to
select (SQ.OFF.00) and the SQ will be closed.
14.4.3
ATT adjustment on AIR:
Short press [
SET
] for the third time, ATT/DX/LOCAL/NORMAL display
will be flashing.
Then, short press [
SET
] to select ATT/DX/L0- CAL/NORMAL settings.
Short press [
SET
] again,ATT/DX/LOCAL/NORMAL display will stop
flashing. (DX) or (LOCAL) will exit if there is no operation within five
seconds and the work will be switched to be the current default
setting.