30
14.7
UBD (Customized Receiving) Status
14.7.1
Bandwidth setting on UBD:
Short press [
SET
] for the first time. When "BW" flashes, short press
[
MODE
] key to set the bandwidth to be 4.50KHz, 3.75KHz, 2.50KHz
and 1.70KHz.
14.7.2
Squelsh level (SQ) adjustment:
Short press [
SET
] for the second time, the SQ (SQ.OFF/ON.00) flashes.
Then, short press [
MODE
] to select SQ levels of (SQ.ON.01-
SQ.ON.09). Short press [SET], 'VOL SQ' stop flashing to confirm the
current setting.
If the SQ function is not required, press the above operation to
switch to VOL SQ OFF to turn OFF the automatic noise function.
14.7.3
Adjustment on UBD:
Short press [
SET
] for the third time, ATT/DX/LOCAL/NORMAL will
flash and then short press [
MODE
] to select ATT/DX/LOCAL/NORMAL
setting.
Short press [
SET
]. ATT/DX/LOCAL/NORMAL stops flashing.
ATT/DX/LOCAL/NORMAL will exit if there is no operation within five
seconds and the work will be switched to be the current default
setting.
14.7.4
Resetting range of high and low frequency reception:
Short press [
SET
] for the fourth time, the first number in front of UBD
will flash.
