17
Note: During the automatic scanning: press {
BAND
] or any other key
will stop searching station function. -During automatic station search
and storage, previous frequency points memorized will be updated.
9.3
Time state:
Short press the alarm clock to open/ close the time state (specific
operations are described in 8.2 Operation Introduction)
10.
Operations for Step/Delete [STEP]
10.1
STEP operation:
In the power-on state, press [
STEP
] to set the STEP value
The following step options are available in all frequencies
1.
FM stepping: 50.0KHZ,10.0KHZ,100.0KHZ.
2.
AM frequency: 522-1710KHZ, stepping: 9.0KHZ, 3.0KHZ,
3.
AM frequency: 520-1710KHZ, stepping: 10.0KHZ, 5.0KHZ.
4.
SW stepping: 5.0KHZ, 1.00KHZ, 0.10KHZ, 0.02KHZ, 0.01KHZ.
5.
AIR stepping: 25.0KHZ, 12.5KHZ, 8.3KHZ
6.
CB stepping: 5.00KHZ, 1.00KHZ, 0.10KHZ, 0.02KHZ, 0.01KHZ
7.
VHF/UHF&UBD step: 25.0KHZ, 12.5KHZ, 7.5KHZ, 5.0KHZ, 1.0KHZ
Once the step value is selected, the system will default to the last
selected step value. Press [
TUN"
.
"
] to confirm the last selected
step value.
10.2
Delete station
In startup state, after manual station storage is done according to 7.1
or automatic station search and storage operation according to 9.2.
