manualshive.com logo in svg

Hanna Instruments HI98198 OPDO, Instruction Manual, Page: 16 / 60

Share
Download
Hanna Instruments HI98198 OPDO Instruction Manual Download Page 16

16

SETUP

manually enter a pressure value which will be used for oxygen measurements. Once enabled, pressure 
values are entered from the measurement screen using the   /   keys.

Highlight 

Manual pressure

.

Press the displayed functional key to enable or disable the feature.

Pressure Unit

Option: mmHg, inHg, atm, mbar, psi, kPa

The 

HI98198 

has the ability to convert and display pressure measurements in user selected units. 

Automatic and Manual Pressure will utilize these units.
To change the pressure measurement unit highlight 

Pressure unit 

and press 

Modify

.

Using   /   keys highlight the desired pressure measurement unit.

Press 

Accept

 to confirm or 

ESC

 to exit without saving.

Temperature Unit

Option: ˚C or ˚F

The 

HI98198 

has the ability to convert and display temperature measurements in degree Celsius or 

Fahrenheit.

Highlight 

Temperature Unit

.

To change the temperature unit, press the displayed functional key.

Summary of Contents for HI98198 OPDO





























































Reviews:

No comments