13
SETUP
8. SETUP
Setup menu allows viewing and modifying the measurement parameters.
The following table lists the Setup parameters, their valid range and the factory default settings.
Item
Description
Valid value
Default
Log Separator
Log file column separator
Comma, Semicolon
Comma
Salinity
The solution’s salt content
0 to 70 PSU
0 PSU
Manual Pressure
Used to manually set the pressure
and disable the automatic
barometer measurement
Enabled or disabled
Disabled
Pressure Unit
mmHg, inHg, atm,
mbar, psi, kPa
mmHg
Temperature Unit
°C or °F
°C
Calibration Timeout
Calibration due timer
Disabled, 10 to
70 days
Disabled
BOD Configuration
Sample min delta DO
The minimum diff. between the
start and the end DO val.
0.00 to 50.00 mg/L
0.00 mg/L
Sample min end DO
The minimum end DO value
0.00 to 50.00 mg/L
0.00 mg/L
Seed min delta DO
The minimum diff. between the
start and the end DO val.
0.00 to 50.00 mg/L
0.00 mg/L
Seed min end DO
The minimum end DO value
0.00 to 50.00 mg/L
0.00 mg/L
OUR Configuration
Min time
The minimum time for the OUR test 1 to 3600 s
1 s
Max time
The maximum time for the OUR test 1 to 3600 s
3600 s
Min start DO
The minimum DO value for starting
the OUR test
0.01 to 50.00 mg/L
0.01 mg/L
Min end DO
The minimum DO value at the end
of the OUR test
0.00 to 50.00 mg/L
0.00 mg/L
Total volume
The total volume of the solution to
be tested
0.1 to 300.0 mL
0.1 mL
Sample volume
The volume of sample in the
solution to be tested
0.1 to 300.0 mL
0.1 mL