Hanna Instruments HI98193 Instruction Manual Download

Page: 17 / 64

Use the

keys to scroll the list of BOD initial data records.

Press

to view detailed information for the selected record.

Press

Pg Up/Pg Down

to view the next/previous screen of information.

Use the / keys to view the detailed information about the next/previous record.

Delete

is pressed,

use the

keys to highlight the record to be deleted and then press

CFM

Press

ESC

to exit.

Delete All

is pressed the instrument asks for confirmation. Press

CFM

to confirm or

ESC

to exit

without deleting.

BOD evaluation

From the

BOD

measure screen press

Compute

to evaluate the BOD for a specified sample. The

following screen will be displayed.
If the date of the current measurement is previous to the date of the selected measurement then the

Eval. BOD

key will not be displayed.

Press

to view detailed information for the selected record.

Use

keys to select the bottle for BOD evaluation.

OPERA

TIONAL GUIDE

www.tools.in.th

www.neonics.co.th

Summary of Contents for HI98193

































































Search results

Summary of Contents for HI98193

Reviews:

Related manuals for HI98193

Brands by name

Popular brands

Hanna Instruments HI98193, Instruction Manual

Search results

Summary of Contents for HI98193

Reviews:

Related manuals for HI98193

Brands by name

Popular brands